Plate Loading Test Sets

STANDARDS : ASTM D 1194 | ASTM D 1195 | ASTM D 1196 | BS 1377

Plate Loading  Sets are used to determine the ultimate bearing capacity of compacted foundation and subgrade soil road components in the field.

It provides data for the design and evaluation of rigid and flexible type airport and highway subfloors.

The test consists of applying a load to a steel loading plate placed on the sheet to be measured with the help of a hydraulic jack and detecting the deformation

occurring in the sheet is carried out by way of.

This test basically consists of loading the circular steel plate 30-75 cm in diameter at the foundation level and determining the settlement amount corresponding to

each load increase.

The bearing capacity of the ground is calculated with the help of the settlement-load curve obtained as a result of the experiment.

It gives information about the bearing capacity of the ground under load and its behavior.

Easy and fast to apply

TECHNICAL SPECIFICATIONS 

300 kN capacity Plate BearingTest Set consists of

A 300 kN capacity Piston Assembly and Hydraulic Hand Pump, Analog Manometer, 2.4 m long Datum Bar, 3 pcs. 30 mm travel x 0.01 mm .

Analog Dial Gauges with Dial Gauge Holders, ∅ 12”(305 mm) and ∅18”(457 mm) Loading Plates.

500 kN capacity Plate Bearing Test Set Set consists of

A 500 kN capacity Piston Assembly and Hydraulic Hand Pump, Analog Manometer, 2.4 m long Datum Bar, 3 pcs. 30 mm travel x 0.01 mm Analog Dial Gauges

with Dial Gauge Holders,∅24”(610 mm) and ∅30”(762 mm) Loading Plates.

1000 kN capacity Plate Bearing Test Set Set consists of

A 1000 kN capacity Piston Assembly and Hydraulic Hand Pump, Analog Manometer, 2.4 m long Datum Bar, 3 pcs. 30 mm travel x 0.01 mm Analog Dial Gauges

with Dial Gauge Holders,∅24”(610 mm) and ∅30”(762 mm) Loading Plates.

300 kN capacity Plate Bearing Test Set Set consists of

A 300 kN capacity Piston Assembly and Hydraulic Hand Pump, Pressure Transducer, Battery operated digital readout unit, 2.4 m long Datum Bar, 3 pcs.

30 mm travel x 0.01 mm Analog Dial Gauges with Dial Gauge Holders,∅ 12”(305 mm) and ∅18”(457 mm) Loading Plates.

500 kN capacity Plate Bearing Test Set Set consists of

A 500 kN capacity Piston Assembly and Hydraulic Hand Pump, Pressure Transducer, Battery operated digital readout unit, 2.4 m long Datum Bar, 3 pcs.

30 mm travel x 0.01 mm Analog Dial Gaugeswith Dial Gauge Holders, ∅24”(610 mm) and ∅30”(762 mm) Loading Plates.

1000 kN capacity Plate Bearing Test Set Set consists of

A 1000 kN capacity Piston Assembly and Hydraulic Hand Pump, Pressure Transducer,

Battery operated digital readout unit, 2.4 m long Datum Bar, 3 pcs. 30 mm travel x 0.01 mm Analog Dial Gaugeswith Dial Gauge Holders, ∅24”(610 mm)

and ∅30”(762 mm) Loading Plates.