Automatic Cement Compression & Flexure Testing Machines
STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1
Automatic Cement Compression & Flexure Testing Machines have been designed for reliable and consistent testing of mortar samples.
Please Contact With Us For More Information
| Product Code | Product Description |
| PRS-CEMACCTM | 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz |
| PRS-CEMACCTM /110 | 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz |
| PRS-CEMACFCTM | 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz |
| PRS-CEMACFCTM /110 | 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz |
| PRS-CEMULP | Upper Loading Platen with Ball Seating Assembly Ø:165 mm and Lower Loading Platen, Ø:165 mm |
| PRS-CEMFLEXJ/A | Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM |
| PRS-CEMFLEXJ /E | Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN |
| PRS-CEMCOMJ/A | Compression Jig Assembly to test 50 mm (2”) mortar cubes, ASTM |
| PRS-CEMCOMJ /E | Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN |
| PRS-CEMCOMJ/BS | Compression Jig Assembly BS, to test 70,7 mm mortar cubes |
Automatic Cement Compression & Flexure Testing Machines
STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1
Automatic Cement Compression & Flexure Testing Machines have been designed for reliable and consistent testing of mortar samples.
They havesingle testing chamber – double testing chamber compression or just flexure testing machines
Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed)
should be ordered separately.
The Automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine
has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are;
Setting test parameters, including pace rate (only required when the specimen type is changed.)
Choosing the compression or flexure frame by using the changeover valve.
Pressing the START button on the control unit.
The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure.
Automatically saves the test parameters and test results.
The automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames,
automatic hydraulic power pack with data acquisition and control system
Power Pack
Automatic Hydraulic Power Pack, dual stage, controlled by is designed to supply the required oil to the load frames for loading.
Very silent power pack can load the specimen between 50 N/sec to 2.4 kN/sec with an accuracy of ±5%.
A Rapid approach pump is supplied as standard. Safety valve (maximum pressure valve) is used to avoid machine overloading.
TECHNICAL SPECIFICATIONS
| Product Code | PRS-CM6331 | PRS-CM6431 | |
| Test Type | Compression | Flexure | Compression |
| Capacity | 250 kN | 15 kN | 250 kN |
| Class 1 Measuring Range | 2.5 to 250 kN | 0.5 to 15 kN | 2.5 to 250 kN |
| The roughness value for texture of loading and auxiliary platens |
≤3.2 μm |
≤3.2 μm |
≤3.2 μm |
| Lower Platen Dimensions | 165 mm | 165 mm | 165 mm |
| Upper Platen Dimensions | 165 mm | 165 mm | 165 mm |
| Maximum Vertical Clearance Between Platens |
263 mm |
263 mm |
263 mm |
| Piston Diameter | 160 mm | 80 mm | 160 mm |
| Maximum Piston Movement | 50 mm | 50 mm | 50 mm |
| Horizontal Clearance | 300 mm | 200 mm | 300 mm |
| Power | 750 W | 750 W | |
| Oil Capacity | 20 L | 20 L | |
| Maximum Working Pressure | 125 bar | 30 bar | 125 bar |
| Rapid Approach Rate | 50 mm/min | 80 mm/min | 50 mm/min |
| Dimensions (WxLxH) | 830x500x1650 mm | 1050x500x1650 mm | |
| Weight | 265 kg | 410 kg | |
