ISO TEST STANDARDS
ISO 34-1 / DIN ISO 34-1 : Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
ISO 37 : Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 75-2 : Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
ISO 178 / DIN EN ISO 178 : Plastics — Determination of flexural properties
ISO 252 : Conveyor belts — Adhesion between constitutive elements
ISO 306 / DIN EN ISO 306 : Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST)
ISO 527-2 / DIN EN ISO 527-2 : Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 527-3 / DIN EN ISO 527-3 : Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
ISO 527-4 : Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 604 / DIN EN ISO 604 : Plastics – Determination of compressive properties
ISO 813 / DIN ISO 813 : Determination of adhesion to a rigid substrate – 90 degree peel method
ISO 844 / DIN EN ISO 844 : Rigid cellular plastics — Determination of compression properties
ISO 898-1 / DIN EN ISO 898-1 : Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
ISO 898-2 / DIN EN ISO 898-2 : Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
ISO 1288 / DIN EN ISO 1288 : Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending )
ISO 1798 : Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
ISO 1806 / DIN EN ISO 1806 : Fishing nets – Determination of mesh breaking force of netting
ISO 1827 : Rubber, vulcanized or thermoplastic Determination of shear modulus and adhesion to rigid plates Quadruple-shear methods
ISO 1922 : Shear properties of sandwich core materials
ISO 1926 : Rigid cellular plastics — Determination of tensile properties
ISO 1927-6 / DIN EN ISO 1927-6 : Monolithic (unshaped) refractory products – Part 6: Measurement of physical properties. 6. Determination of cold crushing strength.
ISO 2039-1 / DIN EN ISO 2039-1 : Plastics – Determination of hardness – Part 1: Ball indentation method
ISO 2062 : Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
ISO 2137 / DIN ISO 2137 : Petroleum products and lubricants – Determination of cone penetration of lubricating greases and petrolatum
ISO 2439 / DIN EN ISO 2439 : Flexible cellular polymeric materials — Determination of hardness (indentation technique)
ISO 2493 : Paper and board — Determination of resistance to bending — Part 2: Taber- type tester
ISO 2563 / DIN EN ISO 2563 : Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings
ISO 2759 / DIN EN ISO 2759 : Board – Determination of bursting strength
ISO 3037 / DIN EN ISO 3037 : Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
ISO 3167 : Plastics — multipurpose test specimens
ISO 3303-1 / DIN EN ISO 3303-1 : Bursting strength of rubber- or plastics-coated fabrics – Part 1: Steel- ball method
ISO 3327 / DIN EN ISO 3327 : Hardmetals – Determination of transverse rupture strength
ISO 3341 : Textile glass — Yarns — Determination of breaking force and breaking elongation
ISO 3347 : Wood — Determination of ultimate shearing stress parallel to grain
ISO 3377- 2 / DIN EN ISO 3377- 2 : Leather – Physical and mechanical tests – Determination of tear load – Part 2: Double edge tear
ISO 3379 / DIN EN ISO 3379 : Leather – Determination of distension and strength of surface (Ball burst method)
ISO 3386-1 / DIN EN ISO 3386-1 : Polymeric materials, cellular flexible – Determination of stress-strain characteristics in compression – Part 1: Low-density materials
ISO 3651-2 / DIN EN ISO 3651-2 : Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
ISO 3781 / DIN ISO 3781 : Paper and board — Determination of tensile strength after immersion in water
ISO 4013 : Concrete — Determination of flexural strength of test specimens
ISO 4074 : Natural rubber latex male condoms – Requirements and test methods
ISO 4578 : Adhesives – Determination of peel resistance of high-strength adhesive bonds – Floating-roller method
ISO 4587 : Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 4624 / DIN EN ISO 4624 : Paints and varnishes, pull off test for adhesion
ISO 4919 : Textile floor coverings – Determination of tuft withdrawal force
ISO 5173 DIN EN ISO 5173 : Destructive tests on welds in metallic materials – Bend tests
ISO 6237 : Adhesives – wood-to-wood adhesive bonds. Determination of shear strength by tension loading
ISO 6238 : Testing of small clear specimens of timber
EN 6259-1 / EN ISO 6259−1 : Thermoplastics pipes – Determination of tensile properties – Part 1: General test method
ISO 6259-3 : Thermoplastics pipes – Determination of tensile properties – Part 3: Polyolefin pipes
ISO 6312 : Road vehicles – Brake linings – Shear test procedure for disc brake pad and drum brake shoe assemblies
ISO 6507-2 / DIN EN ISO 6507-2 : Metallic materials – Vickers hardness test – Part 2: Verification and calibration of testing machines
ISO 6872 / DIN EN ISO 6872 : Dentistry – Ceramic materials
ISO 6892 / DIN EN ISO 6892 : Metallic materials – Tensile testing – Part 1: Method of test at room temperature
ISO 7198 : Cardiovascular implants and extracorporeal systems — Vascular prostheses — Tubular vascular grafts and vascular patches.
ISO 7206 : Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties and performance of stemmed femoral components. Gliding nail fatigue test.
ISO 7389 / DIN EN ISO 7389 : Building construction – Jointing products – Determination of elastic recovery of sealants
ISO 7438 / DIN EN ISO 7438 : Metallic materials — Bend test
ISO / IEC7810 : Identification cards – Physical characteristics
ISO 7808 / DIN EN ISO 7808 : Plastics – Thermosetting moulding materials – Determination of transfer flow
ISO 7864 / DIN EN ISO 7864 : Tensile test fixture to test sterile hypodermic needles
ISO 7886-1 / DIN EN ISO 7886-1 : Sterile hypodermic syringes for single use – Part 1: Syringes for manual use
ISO 7961 : Aerospace — Bolts — Test methods
ISO 8067 : Flexible cellular polymeric materials- Determination of tear strength
ISO 8295 / DIN EN ISO 8295 : Plastics – Film and sheeting – Determination of the coefficients of friction
ISO 8339 / DIN EN ISO 8339 : Building construction – Sealants – Determination of tensile properties (Extension to break)
ISO 8340 / DIN EN ISO 8340 : Determination of tensile properties at maintained extension
ISO 8490 : Metallic materials – Sheet and strip – Modified Erichsen cupping test
ISO 8493 / DIN EN ISO 8493 : Metallic materials – Tube – Drift- expanding test
ISO 8494 : Metallic materials — Tube — Flanging test
ISO 8510-1 : Adhesives — Peel test for a flexible- bonded-to-rigid test specimen assembly — Part 1: 90 degree peel
ISO 8515 : Textile-glass-reinforced plastics – Determination of compressive properties in the direction parallel to the plane of lamination
ISO 8627 : Dentistry; Stiffness of the tufted area of tooth-brushes
ISO 8895 / DIN EN ISO 8895 : Shaped insulating refractory products – Determination of cold crushing strength
ISO 9046 / DIN EN ISO 9046 : Building construction – Jointing products – Determination of adhesion/cohesion properties of sealants at constant temperature
ISO 9073-5 / DIN EN ISO 9073-5 : Textiles – Test methods for nonwovens – Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
ISO 9073-7 / DIN EN ISO 9073-7 : Textiles – Test methods for nonwovens – Part 7: Determination of bending length
ISO 9187-1 / DIN EN ISO 9187-1 : Injection equipment for medical use – Part 1: Ampoules for injectables
ISO 9073-18 / DIN EN ISO 9073- 18 : Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
ISO 9311-2 : Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
ISO 9626 / DIN EN ISO 9626 : Stainless steel needle tubing for the manufacture of medical devices – Requirements and test methods
ISO 9665 / DIN EN ISO 9665 : Adhesives – Animal glues – Methods for sampling and testing
ISO 9836-1 / DIN EN ISO 9836-1 : Geosynthetics – Determination of thickness at specified pressures – Part 1: Single layers
ISO 9895 : Paper and board – Compressive strength – Short-span test
ISO 10059-1 : Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
ISO 10059-2 : Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
ISO 10319 / DIN EN ISO 10319 : Geosynthetics – Wide-width tensile test
ISO 10354 / DIN EN ISO 10354 : Adhesives – Characterization of durability of structural-adhesive- bonded assemblies – Wedge rupture test
ISO / IEC10373-1 : Identification cards – Test methods – Part 1: General characteristics
ISO 10477 / DIN EN ISO 10477 : Dentistry – Polymer-based crown and veneering materials
ISO 10545 / DIN EN ISO 10545 : Ceramic tiles – Part 2: Determination of dimensions and surface quality
ISO 10545-4 : Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength
ISO 11040-4 : Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
ISO / TS 11405 : Dentistry — Testing of adhesion to tooth structure
ISO 11542-2 / DIN EN ISO 11542- 2 : Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
ISO 11608-3 / DIN EN ISO 11608- 3 : Needle-based injection systems for medical use – Requirements and test methods – Part 3: Finished containers
ISO 11644 / DIN EN ISO 11644 : Leather – Test for adhesion of finish
ISO 11747 : Rice — Determination of rice kernel resistance to extrusion after cooking
ISO 11979-3 / DIN EN ISO 11979- 3 : Ophthalmic implants – Intraocular lenses – Part 3: Mechanical properties and test methods. Compression test.
ISO 12192 / DIN EN ISO 12192 : Paper and board — Determination of compressive strength — Ring crush method
ISO 12236 / DIN EN ISO 12236 : Static puncture test on geotextiles
ISO 12402-Fig1 / DIN EN ISO 12402- Fig1 : Standard for personal flotation devices
ISO 12625-5 / DIN EN ISO 12625- 5 : Tissue paper and tissue products – Part 5: Determination of wet tensile strength
ISO 12625-9 / DIN EN ISO 12625- 9 : Tissue paper and tissue products – Part 9: Determination of ball burst strength
ISO 13007 : Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives
ISO 13314 : Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals
ISO 13445 : Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
ISO 13503-2 / DIN EN ISO 13503- 2 : Petroleum and natural gas industries — Completion fluids and materials – Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
ISO 13640 : Buildings and civil engineering works – Sealants – Specifications for test substrates
ISO 13779-4 : Implants for surgery – Hydroxyapatite – Part 4: Determination of coating adhesion strength
ISO 13934/ DIN EN ISO 13934 : Textiles – Tensile properties of fabrics – Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13936-1 / DIN EN ISO 13936- 1 : Textiles – Determination of the slippage resistance of yarns at a seam in woven fabrics – Part 1: Fixed seam opening method
ISO 13936-2 / DIN EN ISO13936- 2 : Textiles – Determination of the slippage resistance of yarns at a seam in woven fabrics – Part 2: Fixed load method
ISO 13936-3 / DIN EN ISO 13936- 3 : Textiles – Determination of the slippage resistance of yarns at a seam in woven fabrics – Part 3: Needle clamp method
ISO 13953 : Polyethylene (PE) pipes and fittings – Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
ISO 13954 : Plastics pipes and fittings – Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 14125 / DIN EN ISO 14125 : Fibre-reinforced plastic composites – Determination of flexural properties
ISO 14126 / DIN EN ISO 14126 : Fibre-reinforced plastic composites – Determination of compressive properties in the in-plane direction
ISO 14130 / DIN EN ISO 14130 : Fibre reinforced plastic composites – Determination of apparent interlaminar shear strength by short beam-method
ISO 14272 / DIN EN ISO 14272 : Resistance welding – Destructive testing of welds – Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
ISO 14555 / DIN EN ISO / 14555 : Welding – Arc stud welding of metallic materials
ISO 14589 : Blind rivets – mechanical testing
ISO 14704 : Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
ISO 14801/ DIN EN ISO 14801 : Dentistry – Implants – Dynamic loading test for endosseous dental implants
ISO 14889 : Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses
ISO 14916 / DIN EN ISO 14916 : Thermal spraying – Determination of tensile adhesive strength
ISO 15107 : Adhesives — Determination of cleavage strength of bonded joints
ISO 15113 : Rubber – Determination of frictional properties
ISO 15361 : Pulps – Determination of zero-span tensile strength, wet or dry
ISO 15490 : Fine Ceramics Tensile Strength
ISO 15630-1 : Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, rods and wire
ISO 15630-2 / DIN EN ISO 15630- 2 : Steel for the reinforcement and prestressing of concrete – Test methods – Part 2: Welded fabric and lattice girder
ISO 15754 : Paper and board — Determination of z-directional tensile strength
ISO 16770 : Plastics – Determination of environmental stress cracking (ESC) of polyethylene – Full-notch creep test (FNCT)
ISO 17697 / DIN EN ISO 17697 : Footwear – Test methods for uppers, lining and insocks – Seam strength
ISO 18488 : Polyethylene (PE) materials for piping systems Determination of Strain Hardening Modulus in relation to slow crack growth
ISO 19095-3 : Plastics – Evaluation of the adhesion interface performance in plastic-metal assemblies – Part 3: Test methods
ISO 19642-2 : Road vehicles — Automotive cables
ISO 19736 / DIN ISO 19736 : Dentistry – Bonding test between polymer teeth and denture base materials
ISO 19927 : Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus by double beam shear test
ISO 19958 : Footwear — Test methods for heels and top pieces — Top piece retention strength
ISO 20126 / DIN EN ISO 20126 : Dentistry — Manual toothbrushes — General requirements and test methods
ISO 20344 / EN ISO 20344 : Personal protective equipment. Test methods for footwear
ISO 20482 / DIN EN ISO 20482 : Testing of metals; Erichsen cupping test on sheet and strip metal having a width of >= 90 mm; Thickness range: 0.2 mm to 2 mm
ISO 20795-1 / DIN EN ISO 20795- 1 : Dentistry – Artificial teeth for dental prostheses
ISO 20932-1 / EN ISO 20932-1 : Textiles. Determination of the elasticity of fabrics. Strip tests.
ISO 20932-2 : Textiles – Determination of the elasticity of fabrics – Part 2: Multiaxial tests
ISO 21182 / DIN EN ISO 21182 : Light conveyor belts – Determination of the coefficient of friction
ISO 21809-3 : Petroleum and natural gas industries
— External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings. Annex H (peel strength test).
ISO 22112 / DIN EN ISO 22112 : Dentistry – Artificial teeth for dental prostheses
ISO 22254 / DIN EN ISO 22254 : Dentistry – Manual toothbrushes – Resistance of tufted portion to deflection
ISO 22631 : Adhesives for floor and wall coverings Peel test
ISO 23910 / DIN EN ISO23910 : Leather – Physical and mechanical tests – Measurement of stitch tear resistance
ISO 23936-2-B.2 / DIN EN ISO23936- 2-B.2 : Petroleum, petrochemical and natural gas industries – Non-metallic materials in contact with media related to oil and gas production – Part 2: Elastomers
ISO 29022 / DIN EN ISO 29022 : Dentistry – Adhesion – Notched-edge shear bond strength test
ISO 29862 / DIN EN ISO 29862 : Self adhesive tapes – Determination of peel adhesion properties
ISO 29864 / EN ISO 29864- Method-B : Self adhesive tapes – Measurement of breaking strength and elongation at break
Showing 1–16 of 97 results
